download
INSTALLATION 1. Remove previously installed brake pedal cover from motorcycle. 2. Align and place brake pedal cover over rubber tread. 3. Insert bolt, with rubber logo properly aligned, into hole in combined new brake pedal cover and rubber tread. 4. Place flat washer onto bolt. 5. Place new brake pedal cover and bolt/washer assembly on brake pedal. 6. Place offset washer on bolt. 7. Adjust and hold offset washer in position covering exposed slot under brake pedal and attach acorn nut to bolt. Tighten acorn nut to 25-29 ft-lbs (33.8-39.3 Nm)
